Fw: Re: Nut Starter

[Sandy and Kees Talen]

Isn't this just a plastic sleeve ? If so how about a piece of the
smaller coax.....take a 4" section and slide the outer plastic
off by 1/4" or so to allow room for the nut. Maybe a piece of
shrink tube on the end of small coax would work. Many times
I've used double sided tape or a tape loop on the end of a
screwdriver for one or two.

Maybe this is some fancier tool supplied later on by Heathkit
but I remember a ribbed red plastic tube ?

73s  Kees K5BCQ

--------- Forwarded message ----------
From: CyberGeezer <cybergeezer74 at HOTMAIL.COM>
To: HEATH at LISTSERV.TEMPE.GOV
Date: Tue, 28 May 2002 09:37:05 -0400
Subject: Re: Nut Starter
Message-ID: <OE23nHiMvYofF49PCFK000081b9 at hotmail.com>
References: <8.26df10eb.2a24d1d0 at aol.com>

----- Original Message -----
From: "Ivan WB4LXR" <MRNILES at AOL.COM>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Tuesday, May 28, 2002 8:28 AM
Subject: Nut Starter


> The red plastic nut starter that was included in many Heathkits is made
by
> DESCO - part # 00200.  Sorry, but I don't know who distributes them.

According to the DESCO website, one of their distributors is Allied
Electronics.  But a search of the on-line Allied catalog does not turn it
up, either under "DESCO 00200" nor under "nut starter".

73 de W2GERry

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html