RG-62/u

[Stu Lyon]

Bob,
Glen Zook and I both offered made-up cable sets for the 301/401 combination.
I gave up on the project after selling a few sets but I think Glen still is
still doing it. See the following link:

http://home.attbi.com/~zcomco/Interconnect.htm

I've found that you can get away with RadioShack vidio cables or RG-58 for
the BFO & LMO signals but the drive on the HET signal is a little low and
not well isolated and the RG-62 is a must.

73, Stu W6CUX
Winnetka, CA
slyon at pacificnet.net


----- Original Message -----
From: "robert jacobson" <bjac38 at JUNO.COM>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Thursday, November 21, 2002 12:59 PM
Subject: RG-62/u


> Hi all, I just received a set of SB401 and SB300, The book states you
> must use RG-62U between Reveiver BFO,LMO,Het OSC  and Transmitter Does
> and one have any with our with RCA plugs, Is there any out cable I could
> use.
>
> Bob N2HSN
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html