HA-10 Rectifiers

Glen Zook gzook at YAHOO.COM
Fri Aug 8 12:55:58 EDT 2003


The first time you turn on the Warrior after it has
been off for a while (like several days), you need to
let the 866 tubes cook for a while.  Then, if you use
the linear every day, or so, then 1 to 2 minutes
should be OK.

Glen, K9STH


--- "Kechkaylo Dave (ATLINKS)"
<kechkaylod at ATLINKS.COM> wrote:

I understand this, but the manual says heat the
filaments for 30 minutes first, then in another part
of the manual, it says to let them warm up for about
one minute first. Which is correct?


=====
Glen, K9STH

Web sites

http://home.comcast.net/~k9sth
http://home.comcast.net/~zcomco

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html




More information about the Heath mailing list