[Heathkit] DX-40 question

[Mark Graalman WB8JKR]

  Hi Ed,

 Thanks for the info. Yes I converted three of them, I used
the article you mention as a starting point but there are
errors in it that I corrected. Also, did a completely
different layout that looks factory, rather than that
"Rats nest" wiring job in the QST article.
 I can E mail you a picture I took of the underside of
the first unit I converted, but I'll have to draw up and
scan a schematic  and layout pictorial to show what I did,
give me a day or two and I'll send that as well.

Mark WB8JKR


On Fri, 26 Dec 2003 09:36:43 -0600 "Ed Worst" <edworst at att.net> writes:
> Hello Mark,
>
> Did you say you just did a solid state conversion for a VF-1?
> That's on my
> winter to-do list.  Do you have an article you can point me to for a
> reference?  I have an article from Dec 72 QST that I was going to
> use, but
> if you have something newer it would probably be a better mod.

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html