More SB-101 Help?

[Neil Morrison]

----- Original Message -----
From: "Kevin J Ward" <kevin_ward at JUNO.COM>


> Dave -
>
> A red flag for me was your statement that the crystals for 21, 28 &
29
....
>
> I keep a lump of beeswax at the workbench for tightening up loose
slugs.
> Use a pen knife to shave a small bit of wax on top of the loose
slug,
> then carefully heat the form as before.  In all cases, keep the
iron from
> actually touching the coil form.  And never, ever use candle wax.
....

Another way is to cut a piece of rubber band and dangle that inside
the former, then run the slug in over it. For sealing slugs and
trimmers I always prefer nail polish because it breaks and is easy to
remove. The color makes it easy to spot also.

Neil

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html