[Heathkit] 54-143 transformer

[Bwana Bob]

Mark,

Maybe it came from an SB-400.

                        Bob WB2VUF

wb8jkr at juno.com wrote:
>
>   I have a 54-143 transformer that I removed
> from a "parts" SB-401, this isn't the transformer
> listed in the manual. The manual listing shows it
> should be part # 54-198.
>
>  All the windings are the same as the 54-198 except
> there is only one primary winding so it cannot
> be wired for 220 v
>
>  My question is, what kit did this transfomer originally
> go with, or did some of the 401's not have 220 volt
> capability?
>
> 73, Mark  WB8JKR
> Support Amateur Radio, have a Ham for dinner
> Member ARRL, QCWA, OTC, Society of Cable Telecommunication Engineers
> WAS, WAC, WTO, DXCC, GJDXCC, VUCC 2M
> Novice 3/71, General 8/72, Advanced 8/78, Extra 8/89
>
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
> $$ See the vintage area on the HCI web site - http://www.w9wze.org $$
> Heathkit mailing list
> Heathkit at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/heathkit

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html