[Heathkit] Heathkit TX-1 Help...

[dlarson]

Hi Jordan.  My TX-1 has the same holes.  I believe mine is an early
model as it has a 6AL5 bias rectifier tube.  I got a manual from
Pete the Manual Man and it shows a couple of selenium rectifiers for
the bias supply. Pictures in the manual doesn't show the holes.  I
put a 1/2" plug in the hole in mine. Looks ok but wish the hole wasn't
there.
73
Dave WB0TSR
On Wed, 2003-05-28 at 15:26, Jordan Arndt wrote:
> Hi..Can someone provide any info on why and when Heath produced a TX-1
> that had an extra hole on the front panel, approx 2 1/4" on center from
> the Spotting Switch..? It is at the same horizontal height also...it has
> to be original, as the inside of the hole also has the same paint as the
> fron panel, and the panel finish is original....The extra hole lines up
> with the hole in the front sub panel , that is just in front of the VFO
> coil case....Has anyone else seen this..?  73 de Jordan....
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html