HW 101 Dial

[Mark Graalman WB8JKR]

  Yep, that's normal. 5.5 MHz on the VFO is 0 on the dial because of
the injection scheme.

Mark  WB8JKR


On Thu, 27 Nov 2003 22:52:46 -0600 Charles W Tannehill
<jltanehill1 at JUNO.COM> writes:
> Hi group, I'm rebuilding an HW 101 and have a question about the
> frequency dial. When I turn the VFO knob clockwise, the dial turns
> clockwise indicating tuning to a lower frequency. At the same time,
> the
> variable capacitor in the VFO opens to a lower capacitance
> indicating it
> should be tuning to a higher frequency. The jackson drive is smooth
> in
> operation. Is this normal? 73's, Leon Tannehill KG4JRK.
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control -
> http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html