Heathkit Test Equipment

[Ron]

Unless you insist on a Heathkit product, this can be
hand built, very cheaply, from readily available parts.
Also, kit (that include a PCB and the required few parts,
but no enclosure) are available from Elenco, Velleman
and others.

-- Ron


John Parker wrote:
>
> All,
>
> I'm sorry I wasn't very specific.  I'm getting ready to build a Ten-Tec
> 2-Meter Rig, Model 1220 and the amp model 1222.
> In the directions, it indicates that I need to have a regulated,
> well-filtered 12-14 volts DC supply (1 amp minimum).
>
> Tks,
>
> John
>
> At 04:04 PM 10/25/03 -0400, Charles W. Morehouse wrote:
> >John,
> >Lots and lots of them in all voltages and current ranges. 73.
> >Wayne;
> >W4GBW
> >
> >John Parker wrote:
> >
> >>Hi All,
> >>
> >>Does anyone know if Heathkit produced a benchtop DC voltage regulated power
> >>supply.
> >>
> >>Tks,
> >>
> >>John
> >>
> >>-----------------------------------------------------------
> >>This list is a public service of the City of Tempe, Arizona
> >>-----------------------------------------------------------
> >>
> >>Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> >>To post - HEATH at LISTSERV.TEMPE.GOV
> >>Archives - http://interactive.tempe.gov/archives/HEATH.html
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html