Heathkit Q

[Wayne]

Dale,

These transmitters are designed to operate either by themselves as a
stand-alone unit, or as a 'transceiver' when connected to the matching
Heathkit SB-series receiver.

Just follow the manual instructions for "Transmitter Operation Only" on page
112 of the SB-401 manual (available from the BAMA website if you don't
already have one - http://bama.sbc.edu/heath.htm ).

I use my SB-400 as a stand-alone transmitter - works great!

73, Wayne 

-----Original Message-----
From: Heathkit Owners and Collectors List [mailto:HEATH at LISTSERV.TEMPE.GOV]
On Behalf Of Dale Jones
Sent: October 29, 2003 1:13 AM
To: HEATH at LISTSERV.TEMPE.GOV
Subject: Heathkit Q

When trying to test a SB 400 or SB 401  for power out, do you have to have
the receiver connected to the transmitter.

Also I am looking for a SB 650.

Dale AA7XX

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html