SB/HW Tuning Belts

[Bob, WB2UJD]

What I have used successfully on my HW-101 and SB-102 are from an O-ring
assortment I bought for this (among other) purpose.  The ones I used for the
preselector (the ones you are asking about I assume) were R-32 in the kit, AS-568
(some sort of standard) number 226 and are 2" ID, 2.250" OD and 0.125" section
(thick).  These may be slightly thinner than what they replace.  Others may
have a recommendation which more exactly matches the original, but they work
fine for me.  If your rig has an O-ring for the final load control, you should be
able to get one for that as well, but my kit doesn't go that big so I don't
know what number.  My rigs all have the dial cord rather than the O-ring.

Hope this helps.  73,

Bob

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html