[Heathkit] Counter calibration question

[Mark Graalman WB8JKR]

 Glen, after I read your comment and thought about
it you're absolutely right!  I must be losing some brain cells.....

Thanks,

Mark  WB8JKR

On Sat, 13 Sep 2003 18:59:04 -0700 (PDT) Glen Zook <gzook at yahoo.com>
writes:
> If it is connected to its own time base it should read
> 10.00000 MHz no matter what!
>
> You should be able to connect the calibration output
> point through about a 100 pf capacitor to the antenna
> input of the SX-110 with the antenna connected.  That
> should get you plenty of coupling.
>
> Glen, K9sTH
>
>
> --- wb8jkr at juno.com wrote:
>
> for some reason its VERY difficult to couple enough
> signal from the time base to my  SX-110 to beat
> against WWV at 10 MHz.
>
> Anyway, how do you think the calibration would be if I
> connected the counter to its own time base?
>
> =====
> Glen, K9STH
>
> Web sites
>
> http://home.comcast.net/~k9sth
> http://home.comcast.net/~zcomco
>
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
> http://sitebuilder.yahoo.com
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html