Power cord for SB-200

[Army Curtis]

I would suggest that you go to your friendly hardware store, and buy an
extension cord designed to be used with a microwave oven or window type
airconditioner. They use a much heavier cord than your typical extension
cord, and they are three wire. The cord on the SB-200 is soldered
internally in the amp, and then you have to supply the connector of your
choice for the plug end. The extension cord will already have an
excellent plug on it if you want to use the amp on 120 volts (not
recommended). If you use it on 240 volts, cut the original plug off and
pick up the proper plug while you're at the hardware store.

Hope this helps.

Army - AE5P
Nacogdoches, the oldest town in Texas


-----Original Message-----
From: Heathkit Owners and Collectors List
[mailto:HEATH at LISTSERV.TEMPE.GOV] On Behalf Of Leonard Stoner
Sent: Sunday, September 21, 2003 8:03 PM
To: HEATH at LISTSERV.TEMPE.GOV
Subject: Power cord for SB-200

Does any one know where I can get a NEW power cord for my SB-200 AMP,
thanks.

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=ATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html