Would you part w/ an unbuilt kit?

[pratt.family]

Hello Paul..

I certainly agree with Kevin.. The people who are selling this unbuilt
kits think it is more valuable then the built kits. The problem that I
see is kits are not new. The components have been packed away for 30
years or more. I would be worried about the caps (at the very least).
Over time, those caps have dried out, and would need special treatment
to hopefully restore them. Then there's the transformers, same thing..

I truly think you might want to consider the recommendations of Kevin.
There are plenty of heathkits out there in need of a new home as well as
restoration. Food for thought Paul.

Cheers!
Jim K7QI



------------------------------------------------------------------------
-
FIGHT BACK AGAINST SPAM!
Download Spam Inspector, the Award Winning Anti-Spam Filter
http://mail.giantcompany.com


-----Original Message-----
From: Heathkit Owners and Collectors List
[mailto:HEATH at LISTSERV.TEMPE.GOV] On Behalf Of Kevin J Ward
Sent: Wednesday, September 24, 2003 4:08 PM
To: HEATH at LISTSERV.TEMPE.GOV
Subject: Re: Would you part w/ an unbuilt kit?

Paul -

I think you're going to get a lot of urging not to buy and build an
original, unbuilt Heathkit.  They seem to be unreasonably valuable,
as-is, unbuilt.  Here's an idea that could give your Dad the pleasure of
assembling a Heathkit again without spending the long buck.

Find an already built, working or nonworking, cosmetically acceptable
unit.  It probably needs new resistors and new electrolytic and paper
capacitors anyway to make it work properly.  Purchase new, modern
replacement parts to replace the out-of-spec parts.  You will also want
an original manual, complete with the assembly and alignment
instructions.  If you don't already have one, buy a solder sucker and a
decent 25-watt soldering iron.  Now the fun part.

Take the Heathkit apart!  I'm serious.  Be very careful and use the
right
tools.  If parts that won't need to be replaced have extra lead length,
clip them close to the tube socket or terminal strip they are soldered
to.  It will be easier to remove that little stub of a lead when you
have
the parts on the bench.  Clean the cabinet, panel, and chassis, being
careful not to damage lettering or silk screening.  Plastic dial and
meter faces can be polished with jeweler's rouge or another commercial
product.  Check some of the other lists for more on this thread.  I
think
I saw this on the Hallicrafters site, but I'm not certain.  In some
cases
you will want to purchase new hardware.

Now get creative.  Package the whole shebang in a manner similar to the
way Heath did it.  Enclose the manual and a note or a letter, explaining
what you have done.  Don't try to pass it off as a new kit; that won't
fly.  In fact, I bet your Dad will appreciate your effort all the more,
and will be every bit as pleased as he would be with a new kit.  I think
you'll get just as much fun out of it, too.

Let me know what you think.

73,
Kevin  N2IE

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html