DX100???

[Stephen Tetorka]

Hello Friends:

I may be sniffing too much lead based solder during my restoration...so
please excuse me....but....

...it appears to me that the DX100 assembly manual schematic shows the
connections to the "CW-Fone Switch" in error.

Specifically, please compare the schematic connections for pins 5 and 11 on
the switch...to both Pictorial 6 on page 30 and the wiring instructions on the
top of page 31....especially using reference pin 9 which is connected to the
RFC going to the key jack....

Your generous comments are welcome...and thanks....

Steve
WA2TAK

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html