[Heathkit] A quick question on the SB cabinets

[Glen Zook]

All of my units take 8-32 machine screws.  There is a
good chance that someone has replaced the machine
screws with sheet metal screws and have distorted the
threads.  If so, you will have to use either more
sheet metal screws or else take an 8-32 tap and
re-thread the holes.

Glen, K9STH


--- wb8jkr at juno.com wrote:

Can anyone tell me the actual screw size used in the
two pan head screws used on the sides of the SB series
cabinet to keep the top down?  None of my cabinets
have the original screws and nothing I've tried seems
to fit just right, it seems to be 10-32 but I'm just
not real sure, doesn't seem right.

=====
Glen, K9STH

Web sites

http://home.comcast.net/~k9sth
http://home.comcast.net/~zcomco

__________________________________
Do you Yahoo!?
Yahoo! Small Business $15K Web Design Giveaway
http://promotions.yahoo.com/design_giveaway/

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html