Minimum Test Bench Equipment

[Garey Barrell]

Neil -

I hope those pliers had insulated handles!  :-)

73, Garey - K4OAH


Neil Morrison wrote:
> ----- Original Message -----
> From: "Garey Barrell" <k4oah at mindspring.com>
>
>>Neil -
>>
>>OK.  And how do you check for the presence of voltage?  With
>>a wet finger, or just short the terminal with the
>>screwdriver and gauge by the size of the spark?  :-)
>
>
> A friend of mine had been trying to fix an old tube radio receiver
> for a few months with a multimeter. I turned it on, noted the total
> lack of sound along with the fact that the heaters were working. I
> used the screw driver to zap the B+ to ground from the multi section
> cap. I found one point with no voltage, fed by a WW resistor from a
> point that did have B+. I shorted out the resistor with the pliers
> and the radio came to life. Problem solved in 2 minutes.
>
>
>>I'd like to have a VOM in addition to your two items.
>
>
> I have all the toys too, but over the years I learned that it's the
> brain that counts.
>
> Neil
>

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html