Final Neutralization in HW-101

[Mark S Graalman]

 ANYTIME you neutralize them the plate
and screen voltages must be removed.
It doesn't make any difference if they
are B's or not. Go ahead and try the B's, if they don't
work the regular 6146's will.

Mark  WB8JKR


On Fri, 10 Dec 2004 15:34:16 -0800 "Davies, Doug A FOR:EX"
<Doug.Davies at GEMS3.GOV.BC.CA> writes:
> I read somwhere that 6146B's are the preferred final tubes to use in
> the
> HW-101 but they must be neutralized with the plate and screen
> voltages
> disconnected.  Can someone explain why this is so?  I have a choice
> of the
> B's or just straight 6146's for this restoration I'm doing so would
> appreciate a comment or two on this.  Thanks.
>
> Doug  VA7DD
>
> -----------------------------------------------------------
> Products bought, sold or traded here is the responsibility of the
> parties involved.  This list and the City of Tempe are not
> responsible
> for losses or misrepresentations of any kind.  Buyer beware!
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control -
> http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html
>
>

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html