Neutralizing Finals in HW-101

[W6CUX]

There is an official Heathkit procedure that has been
archived at this site:
http://www.elinkusa.com/hw-101/info.htmhttp://www.elinkusa.com/hw-101/info.htm

73, Stu W6CUX

----- Original Message -----
From: "Davies, Doug A FOR:EX" <Doug.Davies at GEMS3.GOV.BC.CA>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Thursday, December 16, 2004 4:44 PM
Subject: Neutralizing Finals in HW-101


I'm at the point in the HW-101 refurbishment where I need to
know how to
neutralize the 6146's in the final.  As I have been made
aware, the best way
to do this is with the plate and screen grid voltages
disconnected.  The
HW-101 manual doesn't mention this method in the
instructions.  Would
someone who has done it this way please explain it to me.
I've gotten
everything to work up to this point.  I don't want to blow
it (no pun
intended) now !!!

Also, how does one hook up an oscilloscope to the antenna
output to watch
the RF output?  I'm sure I can't transmit directly into the
'scope <grin>.
Help here is also appreciated.

Doug  VA7DD

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html