HW-9

[Lee Boulineau]

Try Oren Elliot products  at

http://www.orenelliottproducts.com/

for the variable. They make an exact replacement for
the HW series. Before you do this, clean the WD-40 off
the variable and use a thin layer of light conductive
grease - maybe Glen, K9STH, or another of the rebuild
gurus knows a tradename for a good product. The WD-40
is non-conductive and it can get between the rotor and
the housing and louse everything up!!!

73 es GL de N4MVL Lee

--- Peter Vasconcellos <huntmup at MCHSI.COM> wrote:

> I recently bought a HW-9 that was partially
> assembled. The vernier
> drive was very stiff
> and so was the air variable. The grease had
> congealed and was causing
> binding.  The air variable was cleaned with wd-40.





__________________________________
Do you Yahoo!?
Yahoo! Mail - You care about security. So do we.
http://promotions.yahoo.com/new_mail

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html