RF choke for SB220 (RFC-5)

[Brian Carling]

Hi Joe,

If I were you I would NOT try a plate choke that is only rated at 70 mA in a Heath
SB-220. It will open up in no time with that amplifier

If you are using it at some low level stage like a grid circuit or the osc. plate, then
it may do OK.

On 25 Jun 2004 at 10:46, joe wrote:

> Found a RFChoke in Mouser catalog and going to try it
> and see how it works out.  its part nr 542-70F103, 1000 uf,
> max ohms 24.0 and max current is 70ma ...
>
> Thanks to all!
>
> 73 de Joe w0tut
>
> -----------------------------------------------------------
> Products bought, sold or traded here is the responsibility of the
> parties involved.  This list and the City of Tempe are not responsible
> for losses or misrepresentations of any kind.  Buyer beware!
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control -
> http://www.tempe.gov/lists/control.asp?list=HEATH To post -
> HEATH at LISTSERV.TEMPE.GOV Archives -
> http://interactive.tempe.gov/archives/HEATH.html

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html