4.7 megohm resistors

[digital-conjurers at ADELPHIA.NET]

Bob, try:

www.tubesandmore.com

They have the following:

R-B4D7M
2004 Catalog
page 40

RESISTOR, CARBON FILM, 1 WATT, 4.7M OHM

1 watt - 500V working, 1,000V overload, 0.5" long by 0.14" dia.

Packaged in bags of 5, 20 or 100 pieces of each value.

Will this help?

-Lin/KJ6EF




At 11:49 AM 10/02/2004, you wrote:
>I know I have seen some posts on this in the past but cannot find the old
>emails. I am in need of the 4.7 megohm 1 Watt resistors for the HV metering
>circuit in the SB-200. My reading is low on HV position but the amp has full rated
>output. I do not have a high voltage probe available to me but with the full
>output I am assuming the HV reading is low only.
>
>Thanks,
>
>Bob  WB2UBW
>
>-----------------------------------------------------------
>Products bought, sold or traded here is the responsibility of the
>parties involved.  This list and the City of Tempe are not responsible
>for losses or misrepresentations of any kind.  Buyer beware!
>
>-----------------------------------------------------------
>This list is a public service of the City of Tempe, Arizona
>-----------------------------------------------------------
>
>Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
>To post - HEATH at LISTSERV.TEMPE.GOV
>Archives - http://interactive.tempe.gov/archives/HEATH.html

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html