Cabinet removal tip for DX35/40

[Ron]

John King wrote:
> Had cabinet on DX 35 jammed tightly in front panel in shipment and was so tight in the corners that I could not get rig out of cabinet. Didn't want to damage cabinet or panel getting them apart.
>
> Since cabinet installs inside front panel lip, I decided to CHILL the cabinet to get shrinkage of the cabinet in the jammed corners. I placed ice cubes in four ziplock bags and placed one on each front corner of the cabinet. After chilling, I removed nuts holding the front panel via shaft bushing nuts.
>
> The  heretofore inseparable cabinet and front panel easily released and I was able to get to the INNARDS of MY EBAY WINNING?????? OR who was really the winner????
>

That's a new twist. I've always solved such problems by *heating*
the front panel. My heat gun comes in handy on such occasions.

-- Ron

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html