SB-303 & SB-401

[W6CUX]

Despite what the Heath says, the only critical cable was the HET output of
the -300/301 receivers. The other oscillators (including the -303 het) seem
to be adequately buffered to allow the use of  RG-58 and probably video
cables. Not sure about audio cables.

73, Stu W6CUX

----- Original Message -----
From: "Terry England" <W9cau at AOL.COM>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Friday, September 17, 2004 11:19 PM
Subject: SB-303 & SB-401


> The last set of these i had used RG-62 coax to connect the two together.
But
> this one came with Radio Shack audio cables. It works but don't think
thats
> good or the Heath company would have told you in the manual. Any comments
on
> this will be appricated. w9cau
>

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html