HR-10B

[Terry England]

Tnx to all who have sent info on the problum i had with the HR-10B. I got  it
going and works just fine now. The solder joints on V6 was bad and the tube
pins had oxidation not letting them make good contact. I took a magnifiying
glass and looked at the joints and with that i could see the bad joints with
out  it could not be seen. Tnx again now i have to get the SB-303 and SB401
going  than a HW-101 and a HW-17. Lots of work for the winter. Terry  w9cau

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html