[Heathkit] End of cable 4 pin connector needed.

[Bwana Bob]

Mark:

This connector is also used by Ten-Tec. The inline male connector that
you want for your adapter is available from Hosfelt Electronics
http://hosfelt.com (1-888-264-6464). The part number is 4ILC and the
price is $3.50.

I order lots of small parts from Hosfelt. They are fast and reliable.

                        73,

                        Bob WB2VUF

wb8jkr at juno.com wrote:
>
>   Does anyone know if they make a 4 pin male socket
> to fit on the end of mic cable? What I need is a cable
> version of the 4 pin chassis mounted microphone
> connector that was popular in cb's and the early
> Kenwood rigs. I want to make a microphone
> connector adaptor.
>
> 73, Mark  WB8JKR
>
> Member ARRL, QCWA, OTC,
> Society of Cable Telecommunication Engineers
> WAS, WAC, WTO, DXCC MIXED, DXCC PHONE,
> GJDXCC, VUCC 2M
> 1st place Ohio single op 1988 ARRL  Sweep Stakes
> Novice 3/71, General 8/72, Advanced 8/78, Extra 8/89
>
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
> $$ See the vintage area on the HCI web site - http://www.w9wze.org $$
> Heathkit mailing list
> Heathkit at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/heathkit

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html