Most Accurate Clock

Roger Zimmermann rogerz at FASTERMAC.NET
Thu Apr 7 21:35:34 EDT 2005


Ray,

The alignment suggestion was a good one.  I would also suggest 
adjusting the 100 hz and 1000 hz tone decoders as described in the 
manual.

Good luck!

Roger
On Apr 06, 2005, at 21:37, Ray D. Leivo wrote:

> About 3 or 4 years ago our Most Accurate Clock (GC-1000) stopped 
> picking up the WWV  time signal for an extended time. On the way to 
> take it to the trash bin I decided to try one more time by putting it 
> in the corner of our house closest to Fort Collins, Colorado. 
> Surprise, it worked fine and has picked up the signal since then just 
> fine. Does any one have any comments about this, ie WWV personnel?
>
> Ray VE6ID ( ex VE3AQJ, OZ4DI (summer job in Denmark 1972), VE6ABH )
> St. Paul, Alberta, Canada  - Grid Square DO43 from my 6 metre days, 
> bravo to the SB-110 (never had one!)
>
> -----------------------------------------------------------
> Products bought, sold or traded here is the responsibility of the
> parties involved.  This list and the City of Tempe are not responsible
> for losses or misrepresentations of any kind.  Buyer beware!
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - 
> http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://listserv.tempe.gov/archives/HEATH.html
>

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html




More information about the Heath mailing list