Need odd front panel IF Gain Pot for RX-1

[Charles W. Morehouse]

Hi Lin,
Have run into the same problem.  Find another pot of the right value 
made by the same company.  Take them apart and use the element of the 
new pot to reassemble the RX-1 pot.  Luck, 73.
Wayne,
W4GBW,

digital-conjurers at ADELPHIA.NET wrote:

>Anyone out there got a spare front panel  IF Gain Pot for the RX-1?  This little *&%$ is VERY non-standard, having a threaded section that's almost 5/8" long, so it will fit through that very thick set of two front panels. 
>
>Part Number is B-10-70; it's a 10K linear pot (easy enough, I have three standard ones!) but that long threaded shaft really threw a wrench into things. 
>
>Picture at: www.moonlightsys.com/misc/rx1_IF_gain_pot.jpg
>
>Thanks,
>
>Lin/KJ6EF
>
>
>  
>

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html