SB-110 LMO DIAL

[Terry England]

Hello, it says to put the little guide pin in the grove closest to the hub.  
And the dial is at 90 with the set screw up. My question is at the other end 
of  the dial when you turn the LMO clock wise when it is at the end of rotation 
is  there any more that the LMO will turn if you loosen up the set screw on 
the  dial? I did this to see and it will turn just a little more till it comes 
to the  stop in the LMO not much but maybe a 1/4 -1/2 turn till it hits the 
stop. Is  this normal or should it be on the stop at the end of the dial 
rogation? It  lines up with the numbers on the 0 to 5 logging scale when you turn it 
like it  is suppose to. So is it ok to have a little left on the LMO to turn? 
Terry  w9cau

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html