KL-1 Chippewa Amplifier

[John Meyer]

Jerry,

Be very careful with the plate current meter when HV is applied, it can kill
you. I had a bad encounter with mine back in the sixties, while turning off
the HV I accidentally touched the zero set. Somehow the zero set became
carbonized and had 3000 volts sitting on it, I lit up like a light bulb. I'm
lucky to be alive. Not too long ago I heard about another ham who
experienced the same problem. BE CAREFUL!!

John Meyer  K8IHY

----- Original Message -----
From: "Jerry" <jeryb77 at HOTMAIL.COM>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Sunday, January 02, 2005 10:36 AM
Subject: KL-1 Chippewa Amplifier


> Hello,
> I would apprecate if anyone had any mods or improvment information for the
> KL-1 Chippewa Amplifier.
> TIA
> Jerry
>
> -----------------------------------------------------------
> Products bought, sold or traded here is the responsibility of the
> parties involved.  This list and the City of Tempe are not responsible
> for losses or misrepresentations of any kind.  Buyer beware!
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html
>

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html