AT-1 Meter

[BobR]

Bob,
You might try repairing the original if good physical condx.
May be lucky enough that the open is not too far down the winding.
Mine was in lower part so had to rewind with new wire, or at the
time thought that was only fix.  Hindsight tells me it could
probably have been spliced and reused.
Unwinding and rewinding is a bit of a chore but is do-able.

73, Bob/WBØAUQ


At 20:59 1/7/2005, Bob Harris wrote:
>Hi,  Does anyone have an original meter for an AT-1 that they would consider
>selling? I just restored one and the meter is bad. I have several AT-1 parts
>that I can trade if someone needs a specific part.
>
>Bob
>
>WB2UBW
>
>-----------------------------------------------------------
>Products bought, sold or traded here is the responsibility of the
>parties involved.  This list and the City of Tempe are not responsible
>for losses or misrepresentations of any kind.  Buyer beware!
>
>-----------------------------------------------------------
>This list is a public service of the City of Tempe, Arizona
>-----------------------------------------------------------
>
>Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
>To post - HEATH at LISTSERV.TEMPE.GOV
>Archives - http://listserv.tempe.gov/archives/HEATH.html

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html