RF output

[Brian Carling]

Hi Charles - is that on AM or CW?

Does it use a single 6146 final or what?
If it has two 6146 tubes, then that sounds a little low for 40m.
I wonder what the plate voltage is running? Have you checked it?

Which power supply are you using?

I'll see if we can get the brains trust here on this list to help you!

73 - Brian, AF4K

Charles W. Morehouse wrote:

> Hi Folks,
> Have been restoring an HX/ HR-20 pair.  All tweaked up nicely but the 
> RF out on the HX-20 is a little over 40 watts on 80 and 10 watts 0n 10.
> Is this a little low?  Suspect that the driver is a little lazy.
> Wayne,
> W4GBW,
>
> -----------------------------------------------------------
> Products bought, sold or traded here is the responsibility of the
> parties involved.  This list and the City of Tempe are not responsible
> for losses or misrepresentations of any kind.  Buyer beware!
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://listserv.tempe.gov/archives/HEATH.html
>

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html