SA 206A Capacitor

[Jerry_Rego]

I have an SA 2060 A and the capacitors slip out of position.  I.e. if you set them at the 12 O'clock position they will slip down.  The capacitors shafts just slip from that position.  I have to "shim" the capacitor with a piece of cardboard in order to maintain the friction needed to hold the setting of the capacitor's position.  Does anyone else have this problem and if so what is the cure for that situation I am dealing with.I am also in need for the PC Board that contains the switch and the swr and power and swr circuit that goes with it.  will take one no matter what the condition as long as it can be rebuilt.  Thanks for reading es 73's jerry Rego  KE7YG  @  jerry_rego at comccast.net  ALL HELP WILL BE VERY MUCH APPRECIATED.

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html