FW: [HEATH-TEMPE] SB104a problem

[Brad Allen]

-----Original Message-----
From: Brad Allen [mailto:ballen at frontiernet.net] 
Sent: Tuesday, March 22, 2005 7:31 AM
To: 'HEATH at LISTSERV.TEMPE.GOV'
Subject: RE: [HEATH-TEMPE] SB104a problem


Gentleman,
	I have a SB104A. I am not sure if this is a problem or not. On any
band, when in USB and I press the TUNE button, the display reads the same as
the RCV frequency. When in LSB and I press the TUNE button, it changes by
+3.1KHZ. When I am in CW mode, the frequency stays the same trans/rcv except
it goes you by +.7 from the frequency as compared to USB or LSB which I am
sure is correct. 
	Another possible issue is that the 10 meter band, all 4 positions
seem to be awful quiet as far as frequency noise. WWV band is the same
although I can get WWV weak. Transmit seems to be fine in the sense that I
do get power through to the finals. When transmitting, the frequency counter
that I use does display +1.5 on USB and -2.0 on LSB as compared to the
display. These readings were done on the 7.0 band. Results are off,but by
different amounts and fairly small on other bands. Brad  KB2CHY

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html