Warrior

[lgrindel]

Hi Guys,
 Finally got a Marauder on the air a couple of days ago. Not the 
one I am having trouble with, but another one I picked up. I also 
got a Warrior linear, and hooked it up last night. Everything 
seems to be working FB, about 550 watts out on 20 meters. However 
there is what seems like a rather loud hum coming from the 
vacinity of the xfmr in the Warrior when I hit the hv switch. It 
goes away when I key the mic, then returns when back in receive 
mode. Nothing else unusual happens, and it is not audible in the 
receiver (Mohawk). There is also a POP from the speaker when I un-
key the mic. I just don't want to hurt any of this equipment. As 
always, any ideas are appreciated. Thanks
73
Larry Grindel
KD5ECG 

________________________________________________________________
Sent via the EV1 webmail system at mail.ev1.net


 
                   

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html