Need info on KL-1 amplifier

[Edward B Richards]

As I said earlier, I am building a KL-1 clone. My manual shows two
conflicting pictures. I wonder which is the later one. On pages 24 (fig
8) and 42 (fig 20) it shows the blu screen supply wire running from feed
through CN to the center of a buss wire run through all 4 screen pins.
However, on fold-out figure 8 it shows the blu screen supply wire running
from feed-through CN to a stand-off insulator and then through 2 VHF 
parasitic chokes (a small coil of wire wound over a resistor) feeding
each tube's screen grid. The tubes screen grids are separated. Does any
one know which is the

73, Ed Richards, K6UUZ
Simi Valley, California, 93065
Home of Air Force 1 Pavilion
 later version? Thanks, guys.

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html