DX-60 Kit: Modern Equivalents
john
johnmb at NC.RR.COM
Sun Sep 11 14:57:53 EDT 2005
I'll second this. Perhaps "de-kit" a built one, if you want the building
experience!
At 01:20 PM 9/11/2005, rayfri wrote:
>Ron:
>Suggestion: DONT build it.. Sell it and take the cash. Put most
>of it in your retirement account (if you sell it "there" you will probably
>get enough to fund your retirement account) and take the rest and BUY a
>mint condition dx-60 to put on the air.
>HI HI
>
>
>Ron wrote:
>
>>paul hendershott wrote:
>>
>>>Hi Folks! I will be building (yes, and no doubt lowering the
>>>value of) a Heath DX-60 xmtr kit. I want to order all new
>>
>> > resistors and capacitors and replace them with their modern
>> > equivalents.
>>
>>Why? I would only replace bad caps and then,
>>for the same type, except for tubular paper
>>caps that can be replaced with any film caps
>>(polypropylene are the best for stability).
>>Feed through caps MUST NOT be replaced with
>>anything else. Silver mica are excellent
>>(probably the best) when the lowest impedance
>>at high frequencies is called for. Low cost
>>ceramics may be substituted with NPO or other
>>higher stability ceramic types.
>>
>>I would check electrolytics before construction.
>>If leaky, I would try to form. If unsuccessful,
>>then I would replace.
>>
>>-- Ron
>>
>>
>>>There are a few different types of caps I need help with.
>>>What should i replace the following Cap types with?
>>>
>>>Molded Mica
>>>Silver Mica
>>>Disc Ceramic
>>>feed-through
>>>tubular
>>>
>>>Thanks! 73
>>>Paul
>>
>>
>>-----------------------------------------------------------
>>Products bought, sold or traded here is the responsibility of the
>>parties involved. This list and the City of Tempe are not responsible
>>for losses or misrepresentations of any kind. Buyer beware!
>>
>>-----------------------------------------------------------
>>This list is a public service of the City of Tempe, Arizona
>>-----------------------------------------------------------
>>
>>Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
>>To post - HEATH at LISTSERV.TEMPE.GOV
>>Archives - http://listserv.tempe.gov/archives/HEATH.html
>>
>
>-----------------------------------------------------------
>Products bought, sold or traded here is the responsibility of the
>parties involved. This list and the City of Tempe are not responsible
>for losses or misrepresentations of any kind. Buyer beware!
>
>-----------------------------------------------------------
>This list is a public service of the City of Tempe, Arizona
>-----------------------------------------------------------
>
>Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
>To post - HEATH at LISTSERV.TEMPE.GOV
>Archives - http://listserv.tempe.gov/archives/HEATH.html
>
>
>--
>Internal Virus Database is out-of-date.
>Checked by AVG Anti-Virus.
>Version: 7.0.338 / Virus Database: 267.10.16/83 - Release Date: 8/26/2005
--
Internal Virus Database is out-of-date.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.10.16/83 - Release Date: 8/26/2005
-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved. This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind. Buyer beware!
-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------
Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html
More information about the Heath
mailing list