SB-102 Part needed

[W6CUX]

Is that the same pot as the balance modulator null pot (I don't have my
manuals handy)? If so, that pot is infamous for opening up and there are
several service bulletins regarding it.  You should strongly consider
replacing it (and the balance modulator pot) with a multi-turn trim-pot such
as:

http://www.mouser.com/catalog/623/498.pdf    652-3296W-1-201 $2.20

The trim-pot would mount on the top side of the PCB in the same three solder
pads as the original pot.

73, Stu W6CUX

----- Original Message ----- 
From: "Jim Altman" <jaltman at ALTLAW.COM>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Sunday, September 18, 2005 3:06 PM
Subject: [HEATH-TEMPE] SB-102 Part needed


Looking for a 200 ohm pot part number 10-147.  It's the S-Meter zero.  I
have an SB-102, but I'd bet it's the same in the 100/101 and maybe the HW's.

Jim Altman
jaltman at altlaw.com

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html