Heath Ham radios

JF lhouseparker at LIVINGSTON.NET
Tue Sep 20 19:37:09 EDT 2005


On 9/19/05 Greg Boye wrote on the Heath List:

>Hi everyone..
>I know that this was discussed about a year or two ago but I didn't
>need this info at the time but I do now.  Could someone tell me where
>to purchase the conductive gease that is used in the Heath tuning
>capacitors?
>My SB-303 VFO now has the "wobbles" and its very hard to tune in SSB
>signals as it jumps around in frequency.
>Thanks,
>Greg W8NGA



A Google search with keyword combination "conductive grease" will result
in a lot of hits like  "Silver Filled Conductive Grease"  at

http://www.2spi.com/catalog/vac/silver-filled-grease.shtml

Expensive stuff, about $40 for a 6.5 oz tube. There are also other
kinds like carbon-filled grease, but don't use that For VFOs - be sure
to get the silver-filled kind. I don't know how well the above stuff
will work on your VFO;  you might want to read the descriptions of
other products found via Google.

An alternative to disassembling the VFO for access to the lube point
is to solder on a flexible conductor as outlined in a 2003 post by
fellow Greenie Mark V. Johnson:

 >I've tried to fix this problem in different ways on many LMO's over
 >the years. Putting more tension on the "wiper", removing the variable
 >cap and thoroughly cleaning the bearings etc. Only sure fix for me was
 >to neatly solder a small piece of braid (copper) to the actual variable
 >cap shaft, and then soldering the other end to gnd. I leave enough
 >braid for "windup" as the rotor is turned through its 180 degrees. I've
 >done this on SB-100's, 101'2 and 102's and my SB-104's. Its been a
 >solid fix for me and ends this problem for good. To solder the braid to
 >the shaft, I file a clean section and use a small but HOT soldering
 >iron. Fastens itself with no problem.

73

John   KE5ZB

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html




More information about the Heath mailing list