Peter Dahl HV Transformer for SB-220

[Robert Dorchuck W6VY]

Has anyone replaced the original HV transformer with a Peter Dahl
transformer?  There are 3 listed on his website with ratings of
1.0 or 1.3 amps but the physical size listed (all 3 are the same)
is just a little large in the width dimension to fit on the
chassis.  The mounting holes are different but that can be worked 
around.

I did email the company and received a response that it would fit.
I re-measured the available space on the chassis and still found
the width one inch to wide.  I sent a second email questioning the
dimensions but have not received a reply.

If anyone has used one of his transformers I would appreciate the
model number of the transformer and if you encountered any problems,

Thanks,

Bob  W6VY

----------------------------------------------------------------
All Outgoing Messages Scanned by Norton Anti Virus 

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html