RF detecting question when tweaking to max or min very low RF voltages

[doc]

> If you want to be able to read RF levels much lower than the typical Heath
> RF probe and VTVM are capable of, I would suggest you take a look at the
> "Wide Range RF Survey Meter" article in the August 2000 issue of QST. I
> recently built one of these using the PC board from FAR Circuits, and it is

Any chance you have that article scanned and could
copy it to me?

That sounds like a very valuable tool!

-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Thanks! & 73, doc kd4e


            |_|___|_|
            | | & | |
               {|
       /\      {|
      /  \     {|
     /    \    {|
    /   @  \   {|
    |   |~_|~~~~|
    |   -| |    |
============\ #   http://bibleseven.com
      KD4E     =====================================
West Central Florida

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html