Mowhawk RX-1 helical coil spring for dial drum

[TChesek@Epix.Net]

I'm getting further into this RX-1 and have not worked on one of these before so I just now realized that the return spring for the dial drum is missing. Before looking at the manual my first thoughts were that since the drum cord was broken all I would need to do is restring it, but it is obvious that it won't work without the spring. Does anyone have one from a parts radio or do you have any ideas for a substitute? Years ago I serviced laser imagesetters and printers and I know that the slip clutches in the drive mechanisms used a spring of that sort.

Thanks & 73,
Tom K3TVC

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html