SB-200 Standby

[Ron Manfredi]

Max,

All you have to do is break the key line, so the amp will not go into 
transmit.  You can add a switch to the front panel, but for a no-holes 
mod, I mounted a switch in a small plastic mini box with an RCA jack on 
it, and a length of cable from the box to the amp.  I plug the line from 
the transceiver into the jack on the box, and use the switch to either 
make or break the connection from the jack to the amp.  Hope this helps.

73,

Ron  WA2EIO


Max Harelik wrote:

> I've been given an SB-200, and have been doing the Harbach mods (pwr 
> sply bd, fan, soft-start). In the course of the work, I see that there 
> is no provision for standby mode, where the linear filaments are lit, 
> but the linear is bypassed when the exciter is keyed. Has anyone made 
> such a mod, and if so, where might I find instructions for it? Thanks.
>
> 73, Max, K5OVW
>
> -----------------------------------------------------------
> Products bought, sold or traded here is the responsibility of the
> parties involved.  This list and the City of Tempe are not responsible
> for losses or misrepresentations of any kind.  Buyer beware!
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://listserv.tempe.gov/archives/HEATH.html
>
>

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html