scope and tuner

[Stu Lyon]

See Page 36, Fig. 12 of the down-loaded manual which shows 
the SB-610 connected between the output of the transmitter 
and the antenna system.

It matters because the antenna side of the tuner may have 
very high voltages due to a high SWR on the feedlines.

73, Stu W6CUX


Scott Jacobsen wrote:
> I recently purchased an SB 610 that seems to work. I have a downloaded
> manual, but cannot find the answer to my question. Should the scope be
> connect between the antenna tuner and the transmitter, or between the
> antenna tuner and the antenna, or does it matter?
> 
> I will be using it only for CW. My transmitter is a Kenwood 830s, and I'm
> using an MFJ 941e tuner. The antenna is either a shortened 40/20 dipole or a
> 5 band "spider" mounted on the roof (with the necessary radials): 80, 20, 15
> & 10 meters.
> 
> 73, and thanks.
> 
> Scott, VA3SLJ
> 

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html