IO-4510 scope problem

[Morris Dillingham]

Check the DC balance adjustment pot.

         73 de KI4IUA
         Morris 






-----Original Message-----
From: Heathkit Owners and Collectors List [mailto:HEATH at LISTSERV.TEMPE.GOV]
On Behalf Of Ron
Sent: Monday, March 20, 2006 8:54 AM
To: HEATH at LISTSERV.TEMPE.GOV
Subject: Re: IO-4510 scope problem

Wade Crowley wrote:
> The y1 and y2 trace position controls will only bring the line
> up to 6 divisions below center. I checked voltages associated with
> the controls and they seem ok,what would cause it in this or some other
> model?

Where did you check the voltages?

I would start at the vertical deflection plates
(points C and D on the Deflection PCB) with no
signal. DC voltages should be equal more or less
at center of position control. If not, I would
work my way backward, measuring at each stage.

Possible causes include out of balance +15V and
-15V lines, unequal component values in the push
pull circuit AND leaky transistor(s), to mention
just a few.

-- Ron

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html

-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.385 / Virus Database: 268.2.5/284 - Release Date: 3/17/2006
 

-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.385 / Virus Database: 268.2.5/284 - Release Date: 3/17/2006
 

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html