Help TX-1 semi-frozen band and mode switches

[Gil Cleeton]

On an Sb-200 amp I found that the trouble was caused by slight mis-alignment 
of the shaft.
Gil  W2/G3LBS

>From: Mike Tyler <K6STU at AOL.COM>
>Reply-To: K6STU at AOL.COM
>To: HEATH at LISTSERV.TEMPE.GOV
>Subject: Help TX-1  semi-frozen band and mode switches
>Date: Wed, 3 May 2006 21:08:58 EDT
>
>Does any one know the trick to free up extremely hard to turn band   and 
>mode
>switches????
>You have to be Mr. Atlas to turn the knobs on the front panel. The switches
>are not totally frozen and will switch back and forth if I place a small
>ignition wrench in the middle of  the switch shaft and turn each switch by  
>hand
>Thanks for any help.
>  Mike, _k6stu at aol.com_ (mailto:k6stu at aol.com)
>
>-----------------------------------------------------------
>Products bought, sold or traded here is the responsibility of the
>parties involved.  This list and the City of Tempe are not responsible
>for losses or misrepresentations of any kind.  Buyer beware!
>
>-----------------------------------------------------------
>This list is a public service of the City of Tempe, Arizona
>-----------------------------------------------------------
>
>Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
>To post - HEATH at LISTSERV.TEMPE.GOV
>Archives - http://listserv.tempe.gov/archives/HEATH.html

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html