SB-400/401 High and Low voltage power supply capacitor upgrade boards

[Michael Waldrop]

Good evening,
   
  Since my last post about upgrading the SB-400/401 HV and LV power supplies, I have since received both boards from the manufacture. I have mounted all the components on each board, removed the old capacitors, resistors and diodes The boards have been installed and connected in my SB-400 chassis. 
   
  Initial testing appears to be going well. However, I am going to do additional testing this weekend and should have the results by Sunday afternoon.
   
  If you are interested in seeing the finish product completely installed in my SB-400, send me an email and I'll send you pictures. If you are also interested in purchasing any of these fully assembled boards, drop me an email and we can discuss options and pricing.
   
   
  73's
   
  Mike
  W5RKL
   

 
---------------------------------
Low, Low, Low Rates! Check out Yahoo! Messenger's cheap  PC-to-Phone call rates.

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html