Need capacitor

[W5EUQ]

   Back then, the only caps  that would handle that voltage without 
breaking down were typically the "doorknob" caps... now days... you 
probably have disc ceramics that will work too... just solder them in or 
use screws to hold the cap.... have fun and enjoy.  Bob

John King wrote:
> Coupling cap in tank circuit of Heath SB 200 has
> failed. It is a 1,000 pf @ 6KV Sprague  doorknob type
> cap. It has threaded holes in each end to facilitate
> mounting. I have some with studs coming out, but I
> need one with threaded holes to screw onto back of
> variable cap.  Probably could use a high voltage disc
> ceramic that will handle RF.
>
> What have you? Will buy. 73, John, K5PGW
>
>
>
>  
> ____________________________________________________________________________________
> Sponsored Link
>
> Rates near historic lows - 
> $200,000 mortgage for $660/ month - 
> http://yahoo.ratemarketplace.com
>
> -----------------------------------------------------------
> Products bought, sold or traded here is the responsibility of the
> parties involved.  This list and the City of Tempe are not responsible
> for losses or misrepresentations of any kind.  Buyer beware!
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://listserv.tempe.gov/archives/HEATH.html
>
>
>   

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html