sb 220 10 meter not working

[Paul Blumhardt]

Check for a bad solder joint on the band switch or 10 meter input coil. 
Moving the amp around may have caused something to some lose.

Paul K5RT

> -----Original Message-----
> From: Heathkit Owners and Collectors List
> [mailto:HEATH at LISTSERV.TEMPE.GOV]On Behalf Of Billing Pros
> Sent: Wednesday, November 29, 2006 6:33 PM
> To: HEATH at LISTSERV.TEMPE.GOV
> Subject: sb 220 10 meter not working
> 
> 
> I have a strange problem.  Had my sb 220 in storage for 2 years 
> and before storing it - "it worked excellent on all bands".  It 
> no longer works on 10 meter but works fine on all the other 
> bands?  The Band Selector looks fine nothing visibly blown 
> ...very confused!
> 
> -----------------------------------------------------------
> Products bought, sold or traded here is the responsibility of the
> parties involved.  This list and the City of Tempe are not responsible
> for losses or misrepresentations of any kind.  Buyer beware!
> 
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
> 
> Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://listserv.tempe.gov/archives/HEATH.html
> 

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html