Smallest Dual-6146 HF Transmitter?

[Glen Zook]

Not true!

It takes 50% of the final amplifier input power to get
100% modulation.  Considering that the modulator is
definitely not 100% efficient the input to the
modulator output stage will be more than 50% of the
final amplifier stage.  But, the actual power required
to produce 100% modulation is 50% of the input power
to the final amplifier stage.

For example, the audio power required to modulate a
100 watt input transmitter is 50 watts.  If the
modulator has an efficiency of 66% then it will take
just over 75 watts input to the final modulator stage.
 But the actual power needed to modulate a class "C"
amplifier to 100% modulation is 50% of the input
power.

Glen, K9STH


--- Brian Wood <wood at LPBROADBAND.NET> wrote:

You ask a lot! In order to get 100% modulation at the
plate, you need to have the same power level as the
transmitted signal, namely 100W. That's why the DX-100
has such a big modulator, with concomitant big, heavy
transformers. And with tubes, you need high voltage,
which usually means big transformers too.









Glen, K9STH

Website:  http://k9sth.com


       
____________________________________________________________________________________
Got a little couch potato? 
Check out fun summer activities for kids.
http://search.yahoo.com/search?fr=oni_on_mail&p=summer+activities+for+kids&cs=bz 

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html